Difference between revisions of "Administrators Guide"
| Line 6: | Line 6: | ||
2. Depending on the model PC, press the proper function key to get the boot menu (this information is commonly listed in the bottom corner of the screen) | 2. Depending on the model PC, press the proper function key to get the boot menu (this information is commonly listed in the bottom corner of the screen) | ||
| − | 3. Once the boot menu has loaded, choose the | + | 3. Once the boot menu has loaded, choose the CD-ROM/DVD-ROM as your boot device and press the '''[Enter]''' key, the Groovix splash screen will pop up and a list of options on installing Groovix will be shown |
* [[InstallationStaticIP]] installing Groovix with an assigned or static IP address | * [[InstallationStaticIP]] installing Groovix with an assigned or static IP address | ||
Revision as of 23:05, 15 September 2010
Installing Groovix PAC software
To prepare a workstation for a Groovix installation, please perform the following three steps before choosing from the installation options below.
1. Power on the PC, eject the DVD-ROM tray and insert the DVD labeled “Groovix Public Access Computing Install DVD”
2. Depending on the model PC, press the proper function key to get the boot menu (this information is commonly listed in the bottom corner of the screen)
3. Once the boot menu has loaded, choose the CD-ROM/DVD-ROM as your boot device and press the [Enter] key, the Groovix splash screen will pop up and a list of options on installing Groovix will be shown
- InstallationStaticIP installing Groovix with an assigned or static IP address
- InstallationDHCP installing Groovix without an assigned or static IP address
If unsure whether a workstation uses a static or dynamic IP address, please contact a system administrator before continuing; Groovix may not be immediately available as a result.
Old Page Hierarchy
- HardDriveInstall
- Setting a StaticIP
- KioskAdministration
