Difference between revisions of "InstallationStaticIP"

From GroovixWiki
Jump to: navigation, search
(Created page with "Groovix demo/live/installation discs use DHCP by default to acquire a network address. If DHCP is not available the computer will not have network access but will otherwise be fu...")
(No difference)

Revision as of 22:10, 15 September 2010

Groovix demo/live/installation discs use DHCP by default to acquire a network address. If DHCP is not available the computer will not have network access but will otherwise be functional. To set a static IP during fully automated installation 

  1. Arrow down to the "Automatic Install with static IP" option
  2. Hit F6, then hit the ESC key to dismiss the dialog that pops up
  3. Change the definitions for PAC_LABEL= , PAC_SITE= , PAC_TYPE= , etc. as you normally would
  4. Also change the ip=eth0,address,255.255.255.0,gateway section to your desired parameters

NOTE: eth0 is the default first interface on a computer, sometimes it can be called something else like wlan0 for wireless cards. If eth0 doesn't work you can find the device name for your hardware after booting the live cd or doing an installation and going into the network settings tool.


To set a static IP post-installation 

  1. After the installation is complete and the machine is fully booted up, hit enter to login as guest, or login as user gvuser (password is usually the same as your root password)
  2. After the user environment is loaded, hit ctrl-alt-g . After a few seconds you will enter your root password.
  3. A Groovix Menu will appear, choose "Network Settings"
  4. On the Connections tab:
        1. Highlight "Wired connection" - hit properties.
        2. Uncheck "Enable roaming mode"
        3. Set "Configuration" to "Static IP Address"
        4. Set "IP address", "Subnet Mask", and "Gateway Address" appropriately for your network.
        5. Hit "OK" 
  5. On the DNS tab: Add your DNS servers
  6. Hit "Close".
  7. After logging out and back in again, see if you can get to google.com in Firefox. If not, double check your settings and try again. On some hardware (especially wireless) it may be necessary to reboot after changing network parameters.
  8. Once you can browse web pages in Firefox, choose "Reboot the machine" from the ctrl-alt-g menu so your machine can be configured by the Groovix Network Customization System.

After the reboot your machine will be complete and ready to use. Retrieved from "http://wiki.groovix.org/index.php?title=StaticIP" Views 

   * Article
   * Discussion
   * View source
   * History

Personal tools 

   * Log in / create account

Navigation 

   * Main Page
   * Community portal
   * Current events
   * Recent changes
   * Random page
   * Help
   * Donations

Search

Toolbox 

   * What links here
   * Related changes
   * Special pages
   * Printable version
   * Permanent link

Powered by MediaWiki GNU Free Documentation License 1.2 

   * This page was last modified 03:14, 3 February 2010.
   * This page has been accessed 319 times.
   * Content is available under GNU Free Documentation License 1.2.
   * Privacy policy
   * About GroovixWiki
   * Disclaimers
Retrieved from "http://wiki.groovix.org/index.php?title=InstallationStaticIP&oldid=132"