Difference between revisions of "Administrators Guide"

From GroovixWiki
Jump to: navigation, search
(Installing Groovix PAC software)
Line 6: Line 6:
  
 
1. Power on the PC, eject the DVD-ROM tray and insert the DVD labeled “Groovix Public Access Computing Install DVD”
 
1. Power on the PC, eject the DVD-ROM tray and insert the DVD labeled “Groovix Public Access Computing Install DVD”
 
+
2. Depending on the model of PC, you may need to adjust the bios boot priority settings or press a special key to enter a boot menu where you can boot from DVD. Bios information is usually displayed momentarily immediately after the computer is powered on.
2. Depending on the model PC, press the proper function key to get the boot menu (this information is commonly listed in the bottom corner of the screen)
+
3. If you have successfully booted from DVD you will see a menu like this with a list of options for installing Groovix:
 
+
image here?
3. Once the boot menu has loaded, choose the CD-ROM/DVD-ROM as your boot device and press the '''[Enter]''' key, the Groovix splash screen will pop up and a list of options on installing Groovix will be shown
+
4. Use the up and down arrows on your keyboard to select one of the options, if you do not hit any keys with 60 seconds the computer will begin booting normally from the hard drive.
  
 
* [[InstallationStaticIP]] for installing Groovix with an assigned or static IP address
 
* [[InstallationStaticIP]] for installing Groovix with an assigned or static IP address
Line 24: Line 24:
 
* Installing printers
 
* Installing printers
 
* Making changes to the user environment
 
* Making changes to the user environment
 
 
  
 
== Using terminal (xterm) ==
 
== Using terminal (xterm) ==

Revision as of 12:44, 20 September 2010

Caution: The Administrators Guide contains technical information about setting up and configuring Groovix to your specifications. Administrative privileges and passwords are necessary for most configurations and should be handled by an IT professional.


Installing Groovix PAC software

To prepare a workstation for a Groovix installation, please perform the following three steps before choosing from the installation options below.

1. Power on the PC, eject the DVD-ROM tray and insert the DVD labeled “Groovix Public Access Computing Install DVD” 2. Depending on the model of PC, you may need to adjust the bios boot priority settings or press a special key to enter a boot menu where you can boot from DVD. Bios information is usually displayed momentarily immediately after the computer is powered on. 3. If you have successfully booted from DVD you will see a menu like this with a list of options for installing Groovix:

image here?

4. Use the up and down arrows on your keyboard to select one of the options, if you do not hit any keys with 60 seconds the computer will begin booting normally from the hard drive.

If unsure whether a workstation uses a static or dynamic IP address, please contact a system administrator before continuing; Groovix may not be immediately available as a result.


Groovix Desktop Administration

Configure the following once Groovix has been installed.

Using terminal (xterm)

  • Using commands
  • Navigation
  • Editing files
  • Killing programs


Remote Access to Groovix PCs

  • SSH
  • VNC

Groovix User Accounts and Profiles


Groovix Update


Using MySQL with Groovix

  • MySQL queries
  • Groovix SQL tables