Difference between revisions of "Groovix Installation Guide"

From GroovixWiki
Jump to: navigation, search
(Created page with "To prepare a workstation for a Groovix installation, please perform the following three steps before choosing from the installation options below. 1. Power on the PC, eject the ...")
 
Line 1: Line 1:
To prepare a workstation for a Groovix installation, please perform the following three steps before choosing from the installation options below.
+
== Booting Groovix ==
 +
To prepare a workstation for Groovix installation, start by inserting the DVD labeled "Groovix Public Access Computing Install DVD" into the DVD-ROM tray on your machine and power it on. Depending on your machine and its boot settings, it may be necessary to manually prompt your workstation to boot from the DVD-ROM drive; to do this, press the key indicated to '''enter setup''' or '''boot menu''' of your workstation's BIOS. BIOS information is usually displayed at the bottom of the screen immediately after the computer is powered on.
  
1. Power on the PC, eject the DVD-ROM tray and insert the DVD labeled “Groovix Public Access Computing Install DVD”
+
[[File:Boot-Screen-1.jpg]]
2. Depending on the model of PC, you may need to adjust the bios boot priority settings or press a special key to enter a boot menu where you can boot from DVD. Bios information is usually displayed momentarily immediately after the computer is powered on.
 
3. If you have successfully booted from DVD you will see a menu like this with a list of options for installing Groovix:
 
image here?
 
4. Use the up and down arrows on your keyboard to select one of the options, if you do not hit any keys with 60 seconds the computer will begin booting normally from the hard drive.
 
  
 +
If you have the option, choose '''boot menu''', this will display all the devices that the workstation can boot from; choose DVD-ROM. If the only option available is '''enter setup''', find the option to configure the '''boot order''' or '''boot priority''' and change the DVD-ROM drive to be first in the list.
 +
 +
Once you have successfully booted from the Groovix DVD you will see a menu [FIG. 1] with a list of options for booting Groovix.<br />
 +
 +
[[File:Boot-Screen-1.jpg|thumb|right|Fig 1. The Groovix boot menu]]
 +
 +
Use the up and down arrows on your keyboard to select one of the options, if you do not hit any keys with 60 seconds the computer will begin booting normally from the hard drive.<br />
 +
 +
== Installing Groovix ==
 +
 +
==== Static IP ====
 
* [[InstallationStaticIP]] for installing Groovix with an assigned or static IP address
 
* [[InstallationStaticIP]] for installing Groovix with an assigned or static IP address
 +
 +
==== Dynamic IP (DHCP) ====
 
* [[InstallationDHCP]] for installing Groovix without an assigned or static IP address  
 
* [[InstallationDHCP]] for installing Groovix without an assigned or static IP address  
  
 
''If unsure whether a workstation uses a static or dynamic IP address, please contact a system administrator before continuing; Groovix may not be immediately available as a result. ''
 
''If unsure whether a workstation uses a static or dynamic IP address, please contact a system administrator before continuing; Groovix may not be immediately available as a result. ''
 +
 +
== Live CD ==

Revision as of 23:32, 23 September 2010

Booting Groovix

To prepare a workstation for Groovix installation, start by inserting the DVD labeled "Groovix Public Access Computing Install DVD" into the DVD-ROM tray on your machine and power it on. Depending on your machine and its boot settings, it may be necessary to manually prompt your workstation to boot from the DVD-ROM drive; to do this, press the key indicated to enter setup or boot menu of your workstation's BIOS. BIOS information is usually displayed at the bottom of the screen immediately after the computer is powered on.

File:Boot-Screen-1.jpg

If you have the option, choose boot menu, this will display all the devices that the workstation can boot from; choose DVD-ROM. If the only option available is enter setup, find the option to configure the boot order or boot priority and change the DVD-ROM drive to be first in the list.

Once you have successfully booted from the Groovix DVD you will see a menu [FIG. 1] with a list of options for booting Groovix.

File:Boot-Screen-1.jpg
Fig 1. The Groovix boot menu

Use the up and down arrows on your keyboard to select one of the options, if you do not hit any keys with 60 seconds the computer will begin booting normally from the hard drive.

Installing Groovix

Static IP

Dynamic IP (DHCP)

  • InstallationDHCP for installing Groovix without an assigned or static IP address

If unsure whether a workstation uses a static or dynamic IP address, please contact a system administrator before continuing; Groovix may not be immediately available as a result.

Live CD